Skip to main content
Skip table of contents

Period Analysis

Chart 1: Average stress levels

🎯 The goal of this chart is to help you identify patterns and stress peaks in the client’s day.

Screenshot 2025-09-24 at 12.22.12.png

Analyse larger periods (e.g 2 weeks or more) to get more accurate results.

Use case 1: Analyse the whole period

1

Select the period that you want to analyse.

👉You can see a blue dot under the dates that there is available stress data.

avg1 (1).gif

2

Set the intervals.

👉We advise using the 15-minute option.

Screenshot 2025-09-24 at 13.16.15.png

3

Adjust the time span to match the measurements' usual start and end times.

Screenshot 2025-09-24 at 13.21.01.png

3.1

Tip: If you don't know your client's usual measurements start and end times, check the Measurement table below.

Screenshot 2025-09-24 at 13.21.29 1.png

4

Read the data carefully. Look for stress peaks or moments of relaxation, and always consider what your client was doing before and during those times.

avg2.png

Use case 2: Analyse different days

Your client usually has a different day program on different days. It is very useful to see on which days your clients experience more stress

1

To understand which days are more stressful than others, set the chart “per day“.

👉 Pay attention to differences—certain routines or activities on specific days may be causing more stress for your client.

Screenshot 2025-09-24 at 14.03.47.png

2

To dig deeper and see which parts of the day make a difference, use the toggle “Separate days“, and sent the chart back to “per 15min”.

💡 Look for patterns in those differences—they may be linked to transitions, certain visitors or caregivers, or other stress factors. Ask yourself: what is different compared to the other days?

Group 2608212.png

Chart 2: Compare periods

Use case 1: Compare 2 different periods

1

Use the date pickers to select two consecutive periods. The card on the left will show the calculated difference.

đź’ˇ This is especially useful when testing interventions across time. Compare at least 2 weeks vs. 2 weeks or 1 month vs. 1 month for more reliable insights.

Group 2608213.png

Use case 2: Compare weekdays vs weekends of the same period

1

Select the same dates in both date pickers. Then, use the additional controls to set weekdays for Period 1 and weekends for Period 2.

đź’ˇ From our experience at Mentech, we’ve observed that clients often show different stress levels on weekends compared to weekdays.

comp1.gif

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.